PME30-XL-N housing units is ready to fit and comprise cast iron housings in which radial insert bearings are fitted. In order to ensure function and reliability under all operating conditions, the bearings and housings are matched to each other.
Flanged housing units PME30-XL-N have four bolts and a centring spigot which is mounted in a turned recess into the machine structure. The centring spigot gives concentric alignment of the housings and relieves the fixing screws of any radial forces.
Bearing housing units PME30-XL-N boundary dimension
|Basic dynamic load rating, radial|
|Basic static load rating, radial|
|Designation of housing|
|Designation of bearing|
Product Application Information of bearing housing units PME30-XL-N
The units PME30-XL-N is used predominantly as locating bearings, but is also suitable as non-locating bearings under low loads and speeds.
PME30-XL-N housing units image(cast iron material, with high load capacity)
Hot tags of PME30-XL-N housing units
PME30-XL-N, PME30-N, PME30-XL-N INA, 4 hole flanged bearing units PME30-XL-N, Four-bolt flanged piloted flnaged units PME30-XL-N, etc.
Expanded PME series housing units available in Sun Rises Group Limited
Freely contact Sun Rises Group Limited for more housing units information. You will always get the response no more than 24 hours via the following mail email@example.com.