The Real Cause Of Damage To Industrial Robot Bearings

The Real Cause Of Damage To Industrial Robot Bearings

Sep 02, 2019

In the environment of industrial robot bearings should be carried out in a lighted environment, should choose astigmatism, so as to better observe the outside of the bearing, to see if there are cracks on its surface and other strange. For example, wear, scratches and pressure bumps in the mechanical cloud process will cause the bearing device to shift, resulting in poor position of the device, resulting in flat load and stress concentration, resulting in the accuracy of the bearing and the reduction of service life.

In order to maintain the original performance of industrial robot bearings in good condition for as long as possible, it needs to be maintained and overhauled in order to prevent accidents, to ensure the reliability of operation, and to improve productivity and economy.

As a maintenance item in operation, there is the rotating tone of the bearing, vibration, temperature, lubricant status, etc.

In general, if industrial robot bearings are used correctly, they can be used until fatigue life is reached, but there will be accidental premature injury and is not resistant to use. This early injury, as opposed to fatigue life, limits on the use of quality known as failure or accident. Many due to installation, use, lubrication on the non-attention, foreign objects from the outside intrusion, for the shaft, shell of the thermal effects of the study is not sufficient.

About the damage state of industrial robot bearings, such as: bearing collar edge card injury, as a reason to consider, lubricant shortage, not suitable, oil-supply construction defects, foreign object senter, bearing installation error, shaft flexing is too large, there will also be these reasons.

Therefore, it is difficult to know the true cause of the damage by investigating only the yRT turntable bearing damage. If we know the use of bearing machinery, conditions of use, the structure around the bearing, to understand the situation before and after the accident, combined with the damage state of the bearing and several reasons to investigate, you can prevent similar accidents can occur again.